An online platform, which performs the planning and design of the surgical guide for your dental implant treatments.

Because you don't have to worry about using software, which takes a lot of time and money to learn to use, and have all the advantages of implant-guided surgery.
You will save time that you will spend on what you want.

If your clinic has an intraoral scanner or lab model scanner, you only have to scan the model or the patient's jaw and send us the file obtained in STL format.

If you do not have a scanner, you will have to send your model to your Dental Lab (most of them have a scanner) and they will send you back the STL file by e-mail.

Check your lab has a 3D printer or milling machine so that when Guisurg sends you the finished splint for Guided Surgery it will be printed or milled.

The person in charge is always the Dentist or Dental Surgeon who performs the surgical treatment to the patient, whom he/she knows and has performed the necessary studies.
The surgeon has full medical responsibility for the elaboration and application of the surgical guide, surgical instruments, implants, guide rings, etc. used.
Guisurg makes a proposal and is exempted from liability upon acceptance by the dentist before payment of any amount.
This plan is a complement of all the documentation related to the implantation and does not replace or cancel other documents necessary for it.

Yes, you must have a guided surgery kit.
Check with your implant distributor, practically all brands have it.

You need a 3D study (Cone Beam or any other type) in Dicom format and the model of the jaw to be treated scanned.

You will receive a PDF proposal. If it is to your liking, you will pay in our payment gateway and you will have the file of your splint in STL format.
Remember that the responsibility for the treatment is the dentist who performs it, so you should analyze in detail the planning that Guisurg presents you.